Using High-Resolution, Multi-sensor Data to Characterize Puerto Rican Forests

After hurricane deforestation in Puerto Rico, NASA scientists study forest regrowth using high-resolution, multi-sensor data.
As a key component of NASA’s G-LiHT system, a 100 megapixel Phase One Industrial camera was used to produce RGB photographs for identification of fine-scale canopy features.


Multiple Sensors Help to Identify Individual Flowers from the Air at 200 mph

During 2017, NASA launched a project funded by the U.S. Department of Energy to study tropical forest regrowth rates. Ecologists were also interested in the role of tropical forests in terms of sequestering carbon. The project consisted of forest data acquisition through airborne LiDAR and image data, as well as ground measurements and terrestrial LiDAR scanning.

NASA’s G-LiHT is a portable, airborne imaging system that simultaneously maps the composition, structure, and function of terrestrial ecosystems using Dual Scanning RIEGL LiDARs, VNIR Imaging Spectroscopy, Broad Band Thermal Imaging, High Resolution Aerial Photos using Phase One Industrial 100MP, and an Applanix POS AV V6 precision GPS-INS.

G-liht-system-results

G-LiHT simultaneously maps the composition, structure, and function of terrestrial ecosystems using: LiDAR; VNIR Imaging spectroscopy; Thermal measurements; stereo RGB photographs; and Solar-Induced Fluorescence (SIF)

"Phase One’s 100MP camera provided the opportunity to develop new algorithmic approaches that can handle large volumes of high-resolution imagery"

Dr. Bruce Cook

Project Scientist - NASA's Goddard Space Flight Center

Quick Facts

GSD 3-4 CM

G-LiHT/Phase One setup-3 cm GSD

500 square miles Area Coverage/Flight

50 flight hours in 2017. Repeated in 2018 following hurricanes Irma and Maria.

NASA G-LiHT Full integration

100MP camera integrated with Goddard's LiDAR, Hyperspectral and Thermal (G-LiHT) airborne imager

The African Tulip Tree

Spathodea Campanulata, or African Tulip Tree, is a non-native tree species with orange-colored flowers that occupies much of the island. It is a very effective colonizer following disturbance and abandonment of agricultural land. The researchers were interested in producing maps of the island that showed where the tree was found, and how much forest canopy volume it represented. A combination of airborne LiDAR and optical image data was used, to characterize the tree canopy.

Data collected enables data-fusion studies by providing coincident data in time and space and provides fine-scale (<1m) observations over the large areas that are needed in many ecosystem studies. NASA developed a classification algorithm that can automatically locate the orange flowers in the fine-resolution aerial imagery.

NASA’S G-LIHT (V2.0)

NASA’S Goddard’s LiDAR, Hyperspectral and Thermal Airborne Imager (G-LIHT) uses LiDAR to provide 3D information about the spatial distribution of canopy elements, visible and near infrared (VNIR) imaging spectroscopy to discern species composition, and variations in biophysical variables and thermal measurements to delineate wetlands and to detect heat and moisture stress in vegetation.

Dr. Bruce Cook from NASA explains “We can better characterize forest ecosystems with multiple sensors as opposed to one killer sensor that does everything. For example, we merged fine-resolution imagery from the Phase One camera with LiDAR data to quantify forest canopy volume that is occupied by Spathodea.”

Intergrated System

    The system includes:

  • Phase One 100 MP aerial photographs
  • Two Riegl scanning LiDARs
  • Hyperspec VNIR imaging spectrometer
  • SIF imaging spectrometer
  • Downwelling irradiance spectrometers
  • Thermal infrared camera
  • Precision GPS/IMU

Data Acquisition

Airborne data has a finer resolution than satellite imagery taken of the same area. Observations on the ground can be scaled to airborne and satellite data. Moderate- and coarse-resolution satellite data provides a wide-area coverage at greater temporal frequency, but often with less spatial detail.

Approximately 50 flight hours were carried out during 2017. The same areas were re-flown during 2018, following hurricanes Irma and Maria. A user-interactive map available on the G-LiHT website allows data to be viewed and downloaded.

Lidar
G-LiHT uses lidar to provide 3D information about the spatial distribution of canopy elements, VNIR (visible to near infrared) imaging spectroscopy to discern species composition, and variations in biophysical variables and thermal measurements to delineate wetlands and to detect heat and moisture stress in vegetation.
Fine-resolution images (~3 cm GSD) where individual flowers can be found in thousands of pixels.

Finding Flowers with Fine-resolution Imagery

Phase One Industrial cameras produce high-resolution images with the required 3cm GSD. This made it possible to identify individual flowers within thousands of pixels.

“Identifying trees that may be in decline is important for forest health studies. This project has been an excellent testbed for making tools for detecting insect and disease outbreaks. Being able to characterize forest health conditions over large areas is important for ecosystem monitoring”.

"Phase One's high-resolution aerial imagery form part of our new digital classification techniques, which open up a whole new territory for NASA," explains Cook.

Phase One Solution

Phase One iXU-RS 1000 Camera*
- 100 MP Aerial Photographs
- 11,608 pixels cross-track coverage
- CMOS
- High noise resistance (effective at low light)
*iXU-RS 1000 is no longer available.


50mm RS Lens

- 50mm
- f/4.0
- 97.4 x 93 x 181 mm
- Rodenstock lens

Get a Wider View of Our Newest Aerial Cameras!

Latest Case Studies

NASA G-LiHT – Using High-Resolution, Multi-sensor Data to Characterize Puerto Rican Forests

After hurricane deforestation in Puerto Rico, NASA scientists study forest regrowth using high-resolution, multi-sensor data. As a key component of NASA's G-LiHT system, a 100...

DigiSky SmartBay – A Multi-level Approach to Aero-photogrammetry.

DigiSky offers aerial photogrammetry and monitoring services and recently completed a multilevel remote sensing mission for IREN ENERGIA S.p.A. to map the Serrù reservoir...

AeroInspekt – Drone Photogrammetry Advances Crane Railway Inspection for Port Transshipment Systems

Storage cranes at Hamburger Hafen und Logistik AG’s (HHLA) modern and efficient shipment yard require an annual survey of over 30km of rail per...

ADS – Using Ultra-High Resolution Imagery to manage Oil and Gas Pipeline Planning

Air Data Solutions were appointed by Total Midstream Integration (TMI) to capture data of oil and gas midstream pipelines. Precise aerial imagery was used...

Aerowest – Creating 3D City Models in a Single Flight

3D urban mapping is required by more cities at a rapid rate. Since February 2017 Aerowest GmbH of Dortmund, Germany has been using IGI’s...

Want to Get a Closer Look? Let Us Show You How

 Save as PDF