CONTACT

Draganfly Advances Aerial Drone Data Collection

The University of Saskatchewan Plant Sciences team conducts extensive agricultural phenotype research and requires precision imagery for digital phenotyping and genomics for crop breeding.
In 2018, Draganfly and the Plant Sciences team sought a new solution with higher resolution images to help achieve more actionable insights.

Digitally Documenting Crop Characteristics

The University of Saskatchewan Plant Sciences team conducts extensive agricultural phenotype research and requires precision imagery for digital phenotyping and genomics for crop breeding. Driven to improve the documentation and processing of crop characteristics, the team is constantly searching for innovative technologies to help them to do so.

Scientists leverage precise digital phenotyping and genomics while using drones to image crops, essentially photocopying fields, to better document and understand crop characteristics. With digital collection, phenotypers can quantify their observations and run images through Convolutional Neural Networks (CNNs) to more rapidly identify changes and trends that may not have been easy for researchers to identify in the past.

Close-up zoom of vegetation for digital phenotyping USASK 2019 ©

“The Phase One Industrial camera is really easy to use. All the information needed to operate and integrate the camera is provided. The level of detail in the integration guide and technical documents far exceeds what we have seen from other camera manufacturers”

Cory Baker

Draganfly Innovations Production Manager

Quick Facts

GSD - 3.8mm

GSD of 3.8mm from 40m Required Altitude AGL
Instead of 3.5mm at 15m Required Altitude AGL

100 x More Area Covered in less flights

5ha covered in 15 flight with 100MP camera
compared to 0.5ha covered in 15 min flight

PHASE ONE DRONE SOLUTION

Drone Solution Phase One Industrial 100MP camera
and DJI M600 PRO Drone

Preparing the UAV and camera before flight
USASK 2019 ©

Improve Data Collection with High-Resolution Imagery

The University’s goal with the project was to simultaneously capture high-resolution RGB and multispectral imagery for plant phenotype research. By using a dual payload that included a much higher resolution color camera with a larger sensor and an additional multispectral camera, they could cover more area in a day and collect more data, while achieving increased spatial resolution.

Draganfly had been working with Phase One Industrial for a year and recommended their 100-megapixel camera along with the MicaSense RedEdge 3. Phase One’s 100MP solution provided a significant resolution increase over previously used cameras and fit the size and weight envelope of many commercially available UAV systems. The 1kg payload capacity of the University’s Draganflyer X4-P system was insufficient for the recommended dual sensor setup. The DJI Matrice 600 Pro proved to be the best platform to build the solution as it had a payload capacity of 5kg, which was sufficient for both cameras, it had an SDK that Draganfly would be able to work with, and it was at a favorable price point.

USASK 2019 ©

Improve Data Collection with High-Resolution Imagery

The medium-format camera was integrated alongside the multispectral sensor onto the DJI platform, operated by the Draganfly Surveyor mission planning software. Design and fabrication of mounting components were required to make both cameras fit on the gimbal together. Although the physical installation was fairly straightforward, the team was challenged in the communication between the UAV operating system and both cameras side-by-side. Phase One Industrial cameras automatically integrate with the DJI M600 UAV, however, customized operating hardware and software development was required in order to trigger both cameras simultaneously.

A purpose-built interface circuit board was designed and software was written to act as a bridge between the DJI A3 Pro autopilot, each of the cameras, and the Draganfly Surveyor mission planning software. In flight, the A3 Pro autopilot runs the automated flight plan and sends camera control and shutter commands through the same interface circuitry to simultaneously trigger the cameras at the correct time. With the custom integration completed, the development team realized a significant improvement in both productivity and image quality when compared to previous data collection methods.

USASK 2019 ©

Phase One Aerial System

The fully integrated Phase Onedrone solution contains:

    • Phase One iXM-100 Aerial Camera
    • 150mm RSM lens
    • DJI M600 PRO drone
    • Phase One iX Capture Mobile Application

The customized solution includes:

    • MicaSense RedEdge 3
    • purpose-built interface circuit board and software to act as a bridge between the DJI A3 Pro autopilot, each of the cameras, and the Draganfly Surveyor mission planning software

The system offers a cost-effective measurement of small-scale areas with millimetre accuracy. The motorized RSM lens offers the flexibility to fly the UAV at higher altitudes, if needed.

Twenty Times More Efficient

The increase in spatial resolution by using the Phase One Industrial 100MP camera has resulted in the University becoming 20 times more efficient at collecting data! They are able to cover up to 10 times more area per flight versus previously used hardware, which gives them similar color image resolution, and saves time as the collection of the multispectral imagery no longer required separate flights.
When directly comparing flights to collect color imagery with a GSD of less than 4mm, Phase One Industrial cameras are able to provide approximately 10 times more land coverage per 15-minute flight. To image a quarter section of land (160 acres or 65ha) at <4mm GSD, it would take approximately 10 flights with the M600 and Phase One setup, while the previously used Draganflyer X4-P and Sony QX100 would require approximately 100 flights. Because of the efficiency of imaging with two cameras simultaneously, the number of flights required has been further reduced, resulting in 20 times more data collected for the equivalent flight duration.

Draganfly-comparison-table

Phase One Solution

iXM-100 Phase One Camera

Phase One iXM-100 Camera
- 100 MP Aerial Photographs
- 11,608 pixels cross-track coverage
- CMOS (effective at 6400 ISO)
- High noise resistance (effective at low light)


150mm RSM Lens

- 150mm
- f/5.6 - f/22
- 1/2500sec

Fully Integrated DJI M600 PRO with iXM-100
- Compatible with iXM-100 and iXM-50
- Ronin-MX gimbal - full control & functionality
- Ideal for professional aerial photography and industrial applications

iX Capture Mobile Application
- Intuitive and user-friendly interface
- Remote management of the camera
- Auto or manual capture settings
- Camera control via DJI Lightbridge

Get a Wider View of Our Newest Aerial Cameras!

Project Partners

With thanks to our partners in this case study

DraganFly Logo
Draganfly inc.
usask-logo-lg
The University of Saskatchewan Plant Sciences team

Latest Case Studies

Eyefly – Close-to-1mm GSD with Large Footprint for 3D Bridge Inspection

Eyefly - Achieve Close-to-1 mm GSD with a Large Footprint for 3D Bridge InspectionEyefly uses a Phase One iXM-100 to fly closer to Buggenum.

AM/NS Calvert – Property inspection in 70% less time

AM/NS Calvert Steel Mill uses a Phase One Industrial iXM 100MP medium format imagery to meet new regulatory commercial-grade requirements on data collected for asset inspection. Additional benefits were realized when the project was completed with a 70% time-saving.

Airbus ALTAIR – A First for Large Scale High Definition 3D Mapping

Airbus Defence and Space acquired Phase One Industrial iXM-100 cameras to be integrated as a payload in the ALTAIR airship. The airship's large payload capacity allows for more than one sensor system for 3D mapping and was used recently for a pilot project between Airbus, vaireco and MVV Energie AG to generate high-definition thermal 3D models using a combination of infrared (IR) and RGB data captured simultaneously.

Uralgeoinform – Phase One Aerial Solution Increased Profitability by 25%

In order to diversify its revenue Uralgeoinform, decided to develop the aerial survey capabilities in a large territory of the Russian Federation. After an economic evaluation with leased equipment yielded positive results, the company acquired the Phase One 190MP Aerial Solution.

NASA G-LiHT – High-Resolution, Multi-sensor Data to Characterize Forests

After hurricane deforestation in Puerto Rico, NASA scientists study forest regrowth using high-resolution, multi-sensor data. As a key component of NASA’s G-LiHT system, a 100 megapixel Phase One Industrial camera was used to produce RGB photographs for identification of fine-scale canopy features.

Want to Get a Closer Look? Let Us Show You How

 Save as PDF

Our case studies are free, but we ask for a little information about you so that we can continue to create content you want to see, and so that we are able to let you know when we have new content available for you!

I agree to receive educational and promotional content and invitations from Phase One A/S via email using the information I provide in this form in accordance with the privacy policy. I can unsubscribe whenever I wish.